Polyethylene has very good performance, especially the insulation dielectric strength is high, so that it is very suitable for wire and cable. Medium to high molecular weight grades have excellent impact resistance, even at room temperature under 40 flow temperature.
OEM: Film grade, Injection molding grade, Blowing molding grade, Extrusion grade.
Use: Polyethylene used for packaging film, rope, woven bags, fishing nets, water pipe; Injection moulding lowgrade commodity and shell, the load bearing components of glue box, turnover box.
5 Liter - 25 Liter
225mm - 297mm
Adjustable
Tinplate
0.25mm - 0.28mm
Plug Lid, Plastic cap, Screw cap
ISO 9001
Accept Customization
UN IA1009
Lacquer, Antirust Oil, Epoxy Resin
You can choose, 1 or 2
CMYK And Pantone
Paint
Adhesives
Liquid Waterproofing Membranes
chemical industry
Other Building Products
| HDPE cable material property | Unit | Typical Value |
|---|---|---|
| Mass density | g/cm 3 | 0.941 - 0.959 |
| Melt flow Rate (190 centidegree / 2.16kg) | g/10 min | ≤1.0 |
| Tensile yield strength | Mpa | ≥19.0 |
| Flexural modulus | Mpa | ≥965 |
| Elongation@break | % | ≥400 |
| Impact Embrittlement temperature | centidegree | Max-118 |
| Dielectric Constant | 100KHZ | 2.32 |
| Dielectric Constant | 1MHZ | 2.31 |
| Loss Tangent | 100KZH | MAX0.0001 |
| Loss Tangent | 1MHZ | MIN1x10 15 |
